Room Material Estimator
Enter the room and the door and window sizes to get wallpaper rolls, floor-covering strips and length, tiles and paint, all rounded up. Everything is calculated in this browser and nothing is stored.
Room size
Without a unit the number is read as metres. 2.4, 240cm and 2400mm all work. Paste something like 3.5 x 4 x 2.4 and it is split across width, length and height.
Doors and windows
One line per door or window, to be taken off the walls. A line with both width and height blank is ignored, and a blank count means 1.
Leave blank for a plain paper. Otherwise each strip is rounded up to a multiple of this.
Added before rounding up. Blank means 0%.
Fill in the room size and the product details below to see the result.
Added before rounding up. Blank means 0%.
Fill in the room size and the product details below to see the result.
Blank means 0 mm.
Picking a layout fills this in, and you can edit it.
Fill in the room size and the product details below to see the result.
Blank means 2 coats.
Use the figure on the tin. It differs between products.
Added before rounding up. Blank means 0%.
Fill in the room size and the product details below to see the result.
Estimate for reference only. Measure the room on site and confirm with your installer or the product label before buying. Spare and loss allowances vary by job.
How to use it
- 1. Room size
- Enter width, length and ceiling height. A bare number is read as metres; add cm or mm to change that, as in 240cm or 2400mm. A comma is a thousands separator when groups have three digits (1,200mm) and a decimal point otherwise (3,5m).
- 2. Doors and windows
- Write the width, height and count of each door and window on its own line. Wallpaper, wall tiles and paint use the wall area minus these openings. Flooring and floor tiles ignore them.
- 3. Material tabs
- Open the wallpaper, flooring, tile or paint tab and type the size of the product you plan to buy. The quantities update as you type, and what you entered stays when you switch tabs.
- 4. Prices
- The price fields are optional. They only multiply the quantity by the number you type. This tool holds no market prices.
How the numbers are worked out
- Wallpaper
- One strip is the ceiling height plus 10 cm of trim, rounded up to a multiple of the pattern repeat if you give one. A roll yields its length divided by the strip length, rounded down. The strips needed are the wall area minus openings divided by the wall area one hung strip covers (roll width times ceiling height), rounded up; dividing by strips per roll and rounding up again gives rolls. Pattern repeat and trim change only the strip length, never the number of strips. "If openings are not deducted" counts the room perimeter divided by the roll width, rounded up, so it is never smaller.
- Flooring
- The strips needed to cover one side of the room are the side divided by the roll width, rounded up, and each strip is as long as the other side plus 10 cm of trim. Both directions are worked out and the shorter total is shown, with the length rounded up to 0.1 m. On a tie the strips run along the length. Pattern matching and seam positions are not considered.
- Tiles
- One tile takes (width + joint) times (height + joint). The surface area divided by that, rounded up, is the base count, and adding the loss and rounding up again is the number to buy. Cut edge tiles and breakage are covered by the loss figure, so real needs depend on tile size and room shape.
- Paint
- Area to paint times the number of coats, divided by the coverage per litre. The coverage printed on a tin depends on the product and the surface, so you enter it yourself. The result is rounded up to 0.1 L.
- Exact arithmetic
- Lengths become whole millimetres and percentages whole tenths of a percent, so all division and rounding is done on integers. Floating-point error cannot push a result across a rounding boundary.
Worked examples
- A 3.5 m by 4.0 m room with 2.3 m walls, minus one door (0.9 by 2.0 m) and one window (1.5 by 1.2 m): wall area is 34.5 m² − 3.6 m² = 30.9 m². A 53 cm by 10 m wallpaper has 2.4 m strips and 4 strips per roll. 30.9 m² ÷ (0.53 m × 2.3 m) = 25.35, so 26 strips are needed and that is 7 rolls; without deducting the openings it is 29 strips and 8 rolls.
- In the same room, 183 cm flooring laid along the length takes 2 strips × (4.0 m + 0.1 m) = 8.2 m, and laid along the width 3 strips × (3.5 m + 0.1 m) = 10.8 m. The 8.2 m option is shorter.
- 14 m² of floor with 60 cm tiles and 2 mm joints: one tile takes 0.362404 m², so 39 tiles is the base count, and a 10% loss makes it 43.
- Painting a 30.9 m² wall twice with paint that covers 10 m² per litre needs 6.18 L, rounded up to 6.2 L. Adding the 14 m² ceiling gives 8.98 L, so 9.0 L.
Examples by room size
Ceiling 2.3 m, no openings, wallpaper 53 cm by 10 m, flooring 183 cm wide, 60 cm square tiles with 2 mm joints and 10% loss, run through the same formulas as the calculator. Other product sizes give other numbers.
| Room (m) | Floor m² (pyeong) | Wallpaper (rolls) | Flooring (m) | Tiles |
|---|---|---|---|---|
| 2.5 × 3.0 | 7.50 (2.27) | 6 | 5.2 | 23 |
| 3.0 × 3.5 | 10.50 (3.18) | 7 | 6.2 | 32 |
| 3.5 × 4.0 | 14.00 (4.24) | 8 | 8.2 | 43 |
| 4.0 × 4.5 | 18.00 (5.45) | 9 | 12.3 | 55 |
| 4.5 × 5.0 | 22.50 (6.81) | 9 | 13.8 | 69 |
| 5.0 × 6.0 | 30.00 (9.08) | 11 | 18.3 | 92 |
Default tile loss by layout
These figures are the upper end of commonly quoted rules of thumb, not a standard or an official rule. Change them to suit the job and your installer.
| Layout | Default loss | Why |
|---|---|---|
| Straight grid | 10% | The plainest layout, with tiles in aligned rows. The loss covers edge cuts and breakage. |
| Diagonal | 15% | Laid at 45 degrees, so every wall edge needs triangular cuts. |
| Herringbone | 20% | An interlocking V pattern that leaves many offcuts. |
| Custom | 0 to 100% | Type in the figure your installer gave you, or one from your own experience. |
Frequently asked questions
- How do I choose the roll size?
- Use the width and length printed in the product description. The 53 cm by 10 m filled in at the start is only an example and differs between products.
- What tile loss percentage should I use?
- There is no fixed rule. It depends on tile size, room shape and the installer, so agree it with them. The layout defaults here are only a starting point.
- Does it cover ceiling wallpaper?
- Wallpaper is worked out for the walls only. The ceiling can be included in the paint tab.
- What if the openings are larger than the wall?
- No result is shown and you are asked to check the sizes. The same happens when an opening is taller than the ceiling.
- Does it tell me prices?
- No. If you type a unit price it is multiplied by the quantity. No market price data is used.
- Can I enter an area in pyeong?
- Area input is not accepted. Enter width and length in metres and the floor area is shown in m² and pyeong. One pyeong is 400/121 m², about 3.3058 m².
- Is what I type stored?
- No. Everything is calculated inside this browser and nothing is sent to a server.